DETAILS
SM 39 B836
Booklet
Finisher
B836
10
When the fold rollers [1] feed the stack 10 mm past the nip, the fold plate retracts
until it no longer touches the stack. The fold unit exit sensor [2] detects the folded
edge of the stack and stops the fold rollers.
11
The rotation of the fold rollers [4] reverses and feeds the folded edge back until
only 3 mm of the fold [5] remains at the nip.
12
The fold rollers [6] rotate forward once again feed out. The fold unit exit sensor [7]
once again detects the edge of the fold.
NOTE: You can do SP6203 001 to increase the sharpness of the fold. The number
of forward and reverse feeds of the fold rollers can be set in the range of -1
to +28. The machine repeats Steps 11 and 12. For more, please refer to
Section "5 Service Tables*.
0 (default, as explained above): The rollers rotate forward and in reverse
one time, then forward to feed out the booklet.
1: The rollers rotate forward and in reverse two times (default plus 1)
-1: The rollers rotate forward but not in reverse
B836D915.BMP
10 11 12
1
2
3
4
5
6
7
To Next Page
Loading...
