Finisher SR5000 (B830)
SM 1-99 B234/B235/B236/D101/D102/D103
Installation
4. Install the ground plate [D] ( x 2)
(M3 x 6).
NOTE: Set the ground plate so that
there is no gap between the
plate and the bottom frame of
the finisher (as shown).
5. Install the table extension [E] ( x 2)
(M4 x 8).
NOTE: The edge of the table extension
should be aligned with the
edge of the finisher.
6. Attach the cushion [F] to the right side
of the upper cover.
7. Install the entrance guide plate [G] (
x 2) (M3 x 6).
8. Insert the shift tray [H] properly into the
grooves and fasten it ( x 4) (M3 x 6).
B830I105.WMF
B830I109.WMF
[H]
[D]
[E]
[F]
[G]
To Next Page
Loading...
