INSTALLATION OF MFP CONTROLLER OPTIONS
B234/B235/B236/D101/D102/D103 1-134 SM
7. On the operation panel, remove the keytops [A] and discard them.
8. Install the “Printer” keytop [B] then the “Scanner” keytop [C]. Select either the
English set or Symbol set for installation. The correct order is:
• Printer (upper)
• Scanner (lower)
9. Attach the serial number decal [D] to the copier.
10. Plug in the power cable and turn the main power switch on.
11. Change SP 5985 001 and 002 from ‘0’ to ‘1’.
12. Turn the main power switch off and on.
13. Follow the instructions in the Operation Instructions to complete the installation
for the printer/scanner option.
B840I103.WMF
[B]
[C]
[D]
[A]
To Next Page
Loading...
