Ricoh B234 - Page 208

PM TABLES
B234/B235/B236/D101/D102/D103 2-8 SM
FUSING UNIT 500K 700K 750K
Pressure roller, cleaning roller
bearings
I
Inspect only *
1
Fusing lamps (x3) I Inspect only
Pressure roller cleaning roller
C
Dry cloth (water or alcohol can
also be used if necessary)
Fusing entrance guide plate (lower) C
Water or alcohol
NA R Fusing cleaning fabric
EU/ASIA R
NA R Fabric pressure roller
EU/ASIA R
NA R Supply roller stopper
EU/ASIA R
Section 3.11.4
Hot roller R
Hot roller strippers
R
Dry cloth
• Cleaning required when
fusing cleaning fabric is
replaced.
• Should be replaced with hot
roller.
Hot roller ball bearings I
Inspect only
Hot roller bushings
I
When replacing hot roller,
lubricate with Barrierta 55L or
S552R on the bushings.
Hot roller gears
C/L
Lubricate with Barrierta
Grease – JFE5 5/2
(A2579300)
Pressure roller
R
When replacing, lubricate with
Barrierta 55L or S552R on the
bushings.
Pressure roller ball bearings I
Pressure roller bushings I Inspect only
Pressure roller strippers I
Dry cloth
Fusing exit roller I
Water, alcohol
Fusing exit guide plates (upper,
lower)
I
Cooling entrance guide plate I
Dry cloth wrapped around a
metal scale
Exit Roller
C
Vertical Relay Roller-Duplex C
Vertical Relay Roller
C
Horizontal Exit Roller C
Transport Roller Driven :Horizontal
Guide plate
C
Transport Roller-Driven :Entrance
Guide
C
Transport Roller-Driven :Guide
Plate-Exit
C
Cooling Transport Belt C
Dry cloth
Discharge Brush :Cooling Transport
Belt
I
Discharge Brush :Entrance
I
Discharge Brush :Exit Guide Plate I
Blower Brush