AROUND THE DRUM
3-54
5. Re-assemble the charge corona unit.
Important: Check the following:
• Make sure the corona wire [A] and cleaning pad [B] are positioned as shown.
• Make sure that the lip of the snap ring [C] faces down toward the grid wire.
6. After installing new wires, reset SP codes SP2001 001 to 2001 006 (Corona
Voltage and Current) to their defaults.
7. Execute SP2962 (Auto Process Control Execution).
B234R209A.WMF
B234R980.WMF
Rear
Front
[A]
[B]
[B]
[C]
Rear
Front
To Next Page
Loading...
