TONER BANK
3-158
21. Screw [A] securing the toner recycling and collection casing [B].
22. Lift the toner recycling and collection casing [B], pull out the pin [C] from the
hole under the case, then pull out the toner bank unit.
Important
• When pulling out the toner bank unit, toner may leak out of the junction
between the tube and toner bank.
• Place a cloth on the machine bottom plate so that the plate does not become
dirty.
• Set the toner bank unit on a sheet of paper or cloth.
B234R909.WMF
[A]
[B]
[C]
To Next Page
Loading...
