MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-28 SM
2911 Transfer Current On / Off Timing
001 La (ON)
Adjusts the transfer current on timing at the leading edge.
[-30~+30 / 0 / 1 mm]
002 Lb (Switch)
Adjusts the transfer current on/off exchange timing.
[0~60 / 45 / 1 mm]
003 Lc (OFF)
Adjusts the transfer current off timing (for example: –5 mm is 5 mm after the trailing
edge).
[-30~+30 / 0 / 1 mm]
004 Med Thick La (Switch)
For medium thick paper.
[-15 to +20/ 0 / 1 mm]
005 Med Thick Lb (Switch)
For medium thick paper.
[0 to 45/ 0 / 1 mm]
006 Med Thick Lc (Switch)
For medium thick paper.
[-40 to +40/ 0 / 1 mm]
007 After Punch La (Switch)
For punched paper.
[-15 to +20/ 1 / 1 mm]
008 After Punch Lb (Switch)
For punched paper
[0 to 45/ * / 1 mm]
* B234/D101: 20
* B235/D102: 20
* B236/D103: 26
009 After Punch Lc (Switch)
For punched paper.
[-40 to +40/ * / 1 mm]
* B234/D101: –25
* B235/D102: –30
* B236/D103: –38
2912 Drum Reverse Rotation Interval
001 1st Reverse Rotation
Sets the length of time the drum is reversed to clean the drum cleaning blade.
[0~7 / 2 / 20 ms]
002 Forward Rotation After 1st Reverse Rotation
Sets the length of time the drum is rotated forward after the 1st reverse rotation.
[0~7 / 0 / 20 ms]
003 2nd Reverse Rotation
Sets the length of time the drum is reversed for the 2nd reverse rotation to clean the
drum cleaning blade again.
[0~7 / 0/ 20 ms]
To Next Page
Loading...
