Main Service Program Mode Tables
SM 5-33 B234/B235/B236/D101/D102/D103
Service
Tables
2969 ID Sensor Pattern Interval-Multiple Copy
Twenty ID patterns are made in an interval of about 1 minute during a continuous copy
process just after process control is completed. Image density will be stabilized.
However, printing productivity will be reduced.
[0~1 / 0/ 1]
0: OFF
1: ON
2972 Toner Suction Collection Bottle Operation Time
Displays the total operation time of the development unit toner collection bottle.
[0~600 / 0 / 1 hour]
Need to replace soon: 580 hours
Need to replace now: 600 hours
After the bottle is replaced, reset the value to "0" by pressing 0 and # (Enter).
2973 Toner Suction Motor Operation Time
Displays the total operation time of the development toner suction motor.
[0~600 / 0 / 1 hour]
Need to replace soon: 570 hours
Need to replace now: 600 hours
After the motor is replaced, reset the value to 0 (zero) by pressing 0 and #.
2974 Toner Supply Interval
Adjusts how often toner is supplied
[0~3 / 0 / 1]
0: 1/1 (every print)
1: ½ (every 2 prints)
2: 1/3 (every 3 prints)
3: ¼ (every 4 prints)
The operation of SP2968 now depends on this SP mode setting. In this machine, the
Vref update interval has been changed from “every 100 prints” to “every [100X(SP2-974
value +1)] prints”. For example, if set to 1, toner is supplied every 2 prints, and SP 2-974
value + 1 = 3.
To Next Page
Loading...
