MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-62 SM
5802 Printer Free Run
Makes a base engine free run
[0~1/0/1]
0: Release free run mode
1: Enable free run mode
Return this setting to off (0) after testing is completed.
Finisher connectors should be disconnected and duplex mode should be off.
5803 Input Check
Displays signals received from sensors and switches. This is the input check for the
main machine. (5.4.1)
5804 Output Check
Turns on the electrical components individually for testing. This is the output check
for the main machine. (5.5.1)
5807 Option Connection Check
This SP displays whether the devices listed below are connected or not:
1: Connected
0: Not connected.
001 ADF (1:Connect)
002 LCT (1:Connect)
003 FIN (1:Connect)
Machine No. Setting 5811
This SP presents the soft keyboard used to enter the 11-digit number of the
machine. The allowed entries are "A" to "Z" and "0" to "9". The setting is done at
the factory, and should not be changed in the field. DFU
5812 Service Tel. No. Setting
001 Service
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
002 Facsimile
Use this to input the fax number of the CE printed on the
Counter Report (UP mode).
003 Supply Displayed on the initial SP screen.
004 Operation Sales representative telephone number.
To Next Page
Loading...
