COPIER (B234/B235/B236/D101/D102/D103)
B234/B235/B236/D101/D102/D103 1-24 SM
Reinstalling the Development Unit
Important: When you reinstall the
development unit, handle it carefully.
• Never allow the development roller to
hit the OPC drum or any other part of
the frame of the development unit
drawer.
• Scratches or other damage to either
the drum or development roller will
adversely affect the operation of the
machine.
1. Align the triangular reference marks
of the development unit and drawer
frame.
2. Place the holes on the edge of the
development unit over the pegs on
the drawer frame.
3. Push the development unit drawer
into the machine, reattach the
faceplate and inner cover, then close
the right front door.
B234i112B.WMF
B234i112A.WMF
To Next Page
Loading...
