Main Service Program Mode Tables
SM 5-89 B234/B235/B236/D101/D102/D103
Service
Tables
5907 Plug & Play Maker/Model Name
Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names
should be registered again.
After selecting, press the “Original Type” key and “#” key at the same time. When
the setting is completed, the beeper sounds five times.
5915 Mechanical Counter Detection
Displays whether the mechanical counter is installed in the machine.
[0~2]
0: Not detected
1: Detected
2: Unknown
Copy Server: Set Function 5967
Enables and disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable the
new setting.[0~1/1]
0: ON
1: OFF
5974 Cherry Server
Selects which version of the Scan Router application program, “Light” or “Full
(Professional)”, is installed.
[0 ~ 1 / 0 / 1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
Device Setting 5985
The NIC and USB support features are built into the GW controller. Use this SP
to enable and disable these features. In order to use the NIC and USB functions
built into the controller board, these SP codes must be set to "1".
001 On Board NIC
002 On Board USB
0: Disable 1: Enable
To Next Page
Loading...
