MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-88 SM
5875 SC Auto Reboot
This SP determines whether the machine reboots automatically when an SC error
occurs.
Note: The reboot does not occur for Type A and C SC codes.
001 Reboot Setting [0~1/0/1]
0: On, 1: Off
On: default: 0 (Reboots automatically) The machine reboots
automatically when the machine issues an SC error and logs the
SC error code. If the same SC occurs again, the machine does
not reboot.
OFF: 1 (Does not reboot automatically. Changing this setting to
"0" sets the machine to reboot automatically after an SC occurs.
002 Reboot Type
This setting determines how the machine reboots after an SC
code is issued.
[0~1/0/1]
0: Allows manual reboot, 1: Automatic reboot
5878 Option Setup
This SP enables the DOS application (Data Overwrite Security). Do this SP after
installing Data Overwrite Security Unit C B735.
5881 NIA DFU
5885 WIM Settings DFU
This SP is a bit switch setting.
Bit Meaning
0 Forbid all document server access (1)
1 Forbid user mode access (1)
2 Forbid print function (1)
3 Forbid fax TX (1)
4 Forbid scan sending (1)
5 Forbid downloading (1)
6 Forbid delete (1)
020
7 Reserved
Permit ROM Update DFU 5886
This SP determines whether the ROM can be updated.
[0-1/0/1]
0: On
1: Off
To Next Page
Loading...
