Main Service Program Mode Tables
SM 5-87 B234/B235/B236/D101/D102/D103
Service
Tables
SMTP Auth Direct Sending 025
Occasionally, all SMTP certifications may fail with SP5860 006 set to "2" to
enable encryption during SMTP certification for the SMTP server. This can occur
if the SMTP server does not meet RFC standards. In such cases you can use this
SP to set the SMTP certification method directly. However, this SP can be used
only after SP5860 003 has been set to "1" (On).
Bit0: LOGIN
Bit1: PLAIN
Bit2: CRAM_MD5
Bit3: DIGEST_MD5
Bit4 to Bit 7: Not Used
5864 Mail Text Clear
This SP clears mail text information. When this SP is called at the request to write
the SP mode data, the mail text information stored on the DCS server is reset to
its default value. This is used as a trigger to clear mail text information when the
system is initialized with the User Tools.
E-Mail Report 5866
This SP controls operation of the email notification function.
001 NIA Disables and re-enables the email notification feature.
[0~1/0/1]
0: Enable
1: Disable
005 NIA
Disables and re-enables the addition of a date field to the
email notification.
[0~1/0/1]
Common Key Info Writing 5870
Writes to flash ROM the common proof for validating the device for NRS
specifications.
001 Writing
003 Initialize
Note: These SPs are for future use and currently are not used.
SD Card Apli. 5873
Allows you to move applications from one SD card another. For more, see
Mergining Applications on One SD Card" in Section "1. Installation".
001 Move Exec
Executes the move from one SD card to another.
002 Undo Exec
This is an undo function. It cancels the previous execution.
To Next Page
Loading...
