MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-108 SM
69 Relay Sensor (Stay On)
70 Registration Sensor (Stay On)
71 Heat Pipe Exit Sensor (Stay On)
72 Exit Sensor (Stay On)
73 Duplex Entrance Sensor (Stay On)
74 Duplex Transport Sensor 1 (Stay On)
75 Duplex Transport Sensor 2 (Stay On)
76 Duplex Transport Sensor 3 (Stay On)
77 Inverter Tray Paper Sensor (Stay On)
78 Registration Sensor (Stay On)
99 Double-Feed Sensor
Paper Jam Loc Paper Jam Locations – Finisher B830 7504
Displays the list of possible locations where a jam could have occurred. Press the
appropriate key to display the jam count for that location. These jams are caused
by the failure of a sensor to activate.
• Paper late error: Paper failed to arrive at prescribed time.
• Paper lag error: Paper failed to leave at prescribed time.
On Screen What It Means
101 Entrance Sensor – Fin. Paper late error
102 Entrance Sensor – Fin. (Stay On) Paper lag error
103 Upper Tray Exit Sensor – Fin Paper late error
104 Upper Tray Exit Sensor – Fin (Stay On) Paper lag error
105 Shift Tray Exit Sensor – Fin Paper late error
106 Shift Tray Exit Sensor – Fin (Stay On) Paper lag error
107 Staple Tray Exit Sensor – Fin Paper late error
108 Staple Tray Exit Sensor – Fin (Stay On) Paper lag error
109 Staple Tray Paper Sensor – Fin Paper late error
110 Staple Tray Paper Sensor – Fin (Stay On) Paper lag error
111 Stack Feed-Out Belt HP Sensor
112 Transport Motors
113 Shift Tray Lift Motor
114 Jogger Motor
115 Shift Motor
116 Staple Motor
117 Stack Feed-Out Belt Motor
118 Punch Motor
119 Z-Fold Jam – Fin
120 Pre-Stack Transport Motor
121 Abnormal Signal – Fin
122 Upper Stopper Motor Lock
123 Not Used
Malfunction
To Next Page
Loading...
