Main Service Program Mode Tables
SM 5-119 B234/B235/B236/D101/D102/D103
Service
Tables
8001 T:Total Jobs
8002 C:Total Jobs
8004 P:Total Jobs
8005 S:Total Jobs
8006 L:Total Jobs
These SPs count the number of times each
application is used to do a job.
[0~9999999/ 0 / 1]
Note: The L: counter is the total number of times the
other applications are used to send a job to the
document server, plus the number of times a file
already on the document server is used.
• These SPs reveal the number of times an application is used, not the number of
pages processed.
• When an application is opened for image input or output, this counts as one job.
• Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
• Only jobs executed by the customer are counted. Jobs executed by the customer
engineer using the SP modes are not counted.
• When using secure printing (when a password is required to start the print job),
the job is counted at the time when either “Delete Data” or “Specify Output” is
specified.
• When a copy job on the document server is printed, SP8022 also increments,
and when a print job stored on the document server is printed, SP8024 also
increments.
• When an original is both copied and stored on the document server, the C: and
L: counters both increment.
• When a print job is stored on the document server, only the L: counter
increments.
• When the user presses the Document Server button to store the job on the
document server, only the L: counter increments.
• When the user enters document server mode and prints data stored on the
document server, only the L: counter increments.
• When an image received from Palm 2 is received and stored, the L: counter
increments.
• When the customer prints a report (user code list, for example), the O: counter
increments.
To Next Page
Loading...
