COPIER (B234/B235/B236/D101/D102/D103)
B234/B235/B236/D101/D102/D103 1-28 SM
6. Set the optics dust filter [A].
7. Loosen the two screws of the bracket [B].
8. Attach the original exit tray at [C] ( x 2) and [D] ( x 1)
9. Re-tighten the screws of the bracket [B] ( x 2).
10. Re-attach the right upper cover ( x 4).
11. Remove the tape from the operating instructions holder and attach it to one of
the front doors.
12. At the back of the machine, connect the ADF to the copier body.
B070I506.WMF
B234I018.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
