Ricoh B234 - Page 665

Main Service Program Mode Tables
SM 5-127 B234/B235/B236/D101/D102/D103
Service
Tables
ADF Org Feeds [0~9999999/ 0 / 1] 8221
These SPs count the number of pages fed through the ADF for front and
back side scanning.
8221 1 Front Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the
Front side count is the same as the number of pages fed for
either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the
Front side count is the same as the number of pages fed for
duplex front side scanning. (The front side is determined by
which side the user loads face up.)
8221 2 Back Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the
Back count is the same as the number of pages fed for duplex
scanning.
With an ADF that cannot scan both sides simultaneously, the
Back count is the same as the number of pages fed for duplex
rear-side scanning.
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count
is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double
counting. Also, the pages are not counted if the jam occurs before the first sheet
is output.
Scan PGS/Mode [0~9999999/ 0 / 1]
8231
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
8231 1 Large Volume
Selectable. Large copy jobs that cannot be loaded in
the ADF at one time.
8231 2 SADF
Selectable. Feeding pages one by one through the
ADF.
8231 3 Mixed Size
Selectable. Select “Mixed Sizes” on the operation
panel.
8231 4 Custom Size Selectable. Originals of non-standard size.
8231 5 Platen
Book mode. Raising the ADF and placing the
original directly on the platen.
• If the scan mode is changed during the job, for example, if the user switches
from ADF to Platen mode, the count is done for the last selected mode.
• If the user selects “Mixed Sizes” for copying in the platen mode, the Mixed Size
count is enabled.
• In the SADF mode if the user copies 1 page in platen mode and then copies 2
pages with SADF, the Platen count is 1 and the SADF count is 3.