MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-130 SM
T:Scan PGS/Rez [0~9999999/ 0 / 1]
8311
These SPs count by resolution setting the total number of pages scanned
by applications that can specify resolution settings.
S:Scan PGS/Rez [0~9999999/ 0 / 1] 8315
These SPs count by resolution setting the total number of pages scanned
by applications that can specify resolution settings.
Note: At the present time, 8311 and 8315 perform identical counts.
831x 1 1200dpi ~
831x 2 600dpi~1199dpi
831x 3 400dpi~599dpi
831x 4 200dpi~399dpi
831x 5 ~199dpi
• Copy resolution settings are fixed so they are not counted.
8381 T:Total PrtPGS
8382 C:Total PrtPGS
8384 P:Total PrtPGS
8385 S:Total PrtPGS
8386 L:Total PrtPGS
8387 O:Total PrtPGS
These SPs count the number of pages printed by
the customer. The counter for the application
used for storing the pages increments.
[0~9999999/ 0 / 1]
The L: counter counts the number of pages
stored from within the document server mode
screen at the operation panel. Pages stored with
the Store File button from within the Copy mode
screen go to the C: counter.
• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT
page is counted as 2.
• When several documents are merged for a print job, the number of pages stored
are counted for the application that stored them.
• These counters are used primarily to calculate charges on use of the machine,
so the following pages are not counted as printed pages:
• Blank pages in a duplex printing job.
• Blank pages inserted as document covers, chapter title sheets, and slip
sheets.
• Reports printed to confirm counts.
• All reports done in the service mode (service summaries, engine
maintenance reports, etc.)
• Test prints for machine image adjustment.
• Error notification reports.
• Partially printed pages as the result of a copier jam.
To Next Page
Loading...
