Main Service Program Mode Tables
SM 5-147 B234/B235/B236/D101/D102/D103
Service
Tables
022 Notch 2: Brightness
023 Notch 2: Contrast
024 Notch 2: Threshold
025 Notch 1(Darker): Brightness
026 Notch 1 (Darker): Contrast
027 Notch 1(Darker): Threshold
028 Independent Dot Erase
Select the independent dot erase type for
Text mode.
A larger value is stronger erase.
[0~7/0/1]
029 Unevenness Correction Selects the unevenness correction.
[0~1/0/1]
0: OFF
1: ON
2003 Text/Photo Mode Setting
001
MTF Filter Coefficient
(Main scan)
Selects the MTF filter coefficient in the main scan direction for Text/Photo mode.
Select a higher number for a stronger filter.
If this is “0”, the MTF filter is not applied.
[0~13/6/1]
002
MTF Filter Coefficient
(Sub scan)
Selects the MTF filter coefficient in the sub scan direction for Text/Photo mode.
Select a higher number for a stronger filter.
If this is “0”, the MTF filter is not applied
[0~13/6/1]
003
MTF Filter Strength
(Main scan)
Selects the MTF filter strength in the main scan direction for Text/Photo mode.
Select a higher number for a stronger filter.
[0~7/2/1]
004
MTF Filter Strength
(Sub scan)
Selects the MTF filter strength in the sub scan direction for Text/Photo mode.
Select a higher number for a stronger filter.
[0~7/2/1]
005 Smoothing Level
Selects the smoothing pattern for Text/Photo mode.
A larger value is smoother. A smaller value could cause moiré to appear in the
image.
[0~7/0/1]
To Next Page
Loading...
