Ricoh B234 - Page 696

MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-158 SM
2750
Magnification Across Feed
Super User Only
User SP
These SP codes fine adjust the magnification of the copy image across the page at
a right-angle to the direction of paper feed. These magnification adjustments are
done separately for 1) Copy mode, and 2) Print mode and from the front/backside of
pages.
[-0.3~+0.3 / 0 / 0.1%]
Note:
• To enter a negative value, press [./*] on the keypad.
• "Copy mode" denotes copying images from originals and printing them.
• "Print mode" denotes doing a print job with a software application and using the
printer driver to print them on the machine.
001 Copy Image: Front
Side
Copy Mode: Imaged copied onto the front side of the sheet
002 Copy Image: Back
Side
Copy Mode: Image copied onto the back side of the machine
(duplexing)
003 Print Image: Front
Side
Print Mode: Image printed onto the front side of the sheet
004 Print Image: Back
Side
Print Mode: Image printed onto the back side of the sheet
(duplexing).
2760
Magnification Adjustment With Feed
Super User Only
User SP
This SP code fine adjusts the magnification of the copy image along the direction of
paper feed.
[-0.3~+0.3 / 0 / 0.1%]
Note:
• To enter a negative value, press [./*] on the keypad.
2770
Temperature/Humidity Display
Super User Only
User SP
This SP displays readings of the current temperature and humidity inside the
machine.
001 Internal Temperature Displays urrent temperature inside the machine.
[-20 to 60/None/1°C]
002 Internal Humidity Current humidity level inside the machine.
[0 to 100/None/1% rH]