PRINTER BIT SWITCH SETTINGS
B234/B235/B236/D101/D102/D103 5-220 SM
1001 Bit Switch
004 Bit Switch 4 DFU - -
1001 Bit Switch
005 Bit Switch 5 0 1
Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation
panel.
Disable Enable
bit 0
If enabled, users will be able to configure a Collate Type, Staple Type,
and Punch Type from the operation panel. The available types will
depend on the device and configured options.
After enabling the function, the settings will appear under:
"User Tools > Printer Features > System"
bit 1 DFU
-
-
bit 2 DFU
-
-
[PS] PS Criteria Pattern3
Pattern1
bit 3
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
Increase max number of the stored jobs
to 1000 jobs.
Disable
(100)
Enable (1000)
bit 4
Enable: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5
DFU -
-
bit 6
DFU -
-
bit 7
DFU - -
1001 Bit Switch
006 Bit Switch 6 DFU - -
1001 Bit Switch
007 Bit Switch 7 DFU - -
⇒
Rev.04/08/2009
To Next Page
Loading...
