A3/11"x17" Tray Unit TK5000 (B331-11)
SM 1-39 B234/B235/B236/D101/D102/D103
Installation
1.4.2 INSTALLATION
CAUTION
Switch the machine off and unplug it from the power source before starting
the following procedure.
1. Remove the shipping material [A] and metal retainer [B] ( x 1).
2. Check the position of the front and back side fences and make sure that they
are set for DLT or A3.
3. If you need to adjust the positions of the side fences for the paper to be loaded
in the tray, remove the front panel [C] ( x 4).
4. Remove the fences and adjust their positions for the paper to be loaded: front
fence [D] ( x 1), back fence [E] ( x 1), and end fence [F] ( x 1)
B331I006.WMF
B331I011.WMF
[C]
[D]
[E]
[F]
[A]
[B]
To Next Page
Loading...
