IMAGE TRANSFER AND PAPER SEPARATION
SM 6-139 B234/B235/B236/D101/D102/D103
Detailed
Descriptions
6.15.2 IMAGE TRANSFER AND PAPER SEPARATION
The registration rollers [A] feed the paper
[B] to the gap between the drum [C] and
the transfer belt [D].
As soon as the leading edge of the first
sheet reaches the gap between the
transfer belt and the drum, the transfer
belt lift lever [E] raises the transfer belt
into contact with the drum. The lift lever
is driven by a solenoid.
Then a positive charge is applied to the
transfer bias roller [F] and transfer belt
bias brush to attract the negatively
charged toner [G] from the drum. It also
attracts the paper and separates it from
the drum.
B234D507.WMF
B234D508.WMF
B234D979.WMF
[G]
[F]
[A]
[B]
[C]
[D]
[E]
4 ~ 8 mm
To Next Page
Loading...
