Ricoh B234 - Page 929

PAPER EXIT/DUPLEX
SM 6-167 B234/B235/B236/D101/D102/D103
Detailed
Descriptions
Inversion Path (Face-down Output, No Duplexing)
When inversion has been selected for the job for face-down output, the paper
goes:
1
Out from under the cooling pipe
2
Down into the inverter/duplexer path at the open exit junction gate
3
Through the nip of the vertical relay rollers
4
Under the duplex entrance sensor
5
Through the duplex entrance rollers
6
Through the open switchback junction gate
7
Through the switchback rollers
8
Between the switchback rollers again after the switchback junction
gate closes and the switchback roller reverses
9
Under the duplex/inverter sensor
10
Through inverter rollers 1
11
Over the closed duplex/inverter junction gate
12
Through the inverter relay rollers
13
Under the inverter relay sensor
14
Through the vertical relay rollers
15
Under the exit sensor
16
Through the exit rollers and out of the machine
B234D908.WMF
1
2
3
4
5
6
7
8
9
10
13
14
15
16
12
11