LCIT RT5010 (B834)
B234/B235/B236/D101/D102/D103 1-58 SM
9. Move the LCT to the right side of the
copier.
10. Open the LCT front cover and
remove screw [A] ( x 1).
11. Fasten the ground wire [B] ( x 1).
12. Remove cover [C] from the back side
of the mainframe.
13. Attach connector [D].
14. Align the LCT on the joint pins, and
dock the LCT with the right side of
the copier.
15. Fasten screw [A] to lock the LCT to the side of the copier.
16. Insert the leveling shoes [E] (x 4) under the leveling feet and level the LCT.
17. Attach the appropriate decals to the trays.
Important!
• The CIS inside the LCT must be calibrated. Do this now. (1.5.3)
B834I107.WMF
B834I108.WMF
[E]
[A]
[B]
[C]
[D]
To Next Page
Loading...
