Siemens SINAMICS G120D - r4689[0...2] CO: Squarewave encoder diagnostics; Sq­wave enc diag; r5600 Pe energy saving mode ID; Pe mode ID; p5602[0...1] Pe energy-saving mode pause time minimal; Pe mod t_pause min; p5606[0...1] Pe energy-saving mode dwell time maximum; Pe t_dwell max

Parameters
List of parameters
1-386
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Description: Displays the encoder status according to PROFIdrive for a squarewave encoder.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: A31422
Note: After alarm A3x422 is output, this parameter is set for 100 ms.
Description: Displays the PROFIenergy mode ID of the effective energy saving mode.
Value: 0: POWER OFF
1: Energy-saving mode 1
255: Ready
Note: Pe: PROFIenergy profiles
Description: Sets the minimum possible pause time for the energy-saving mode.
The value is the sum of the following times:
- Energy-saving mode transition time
- Operating state transition time
- Energy-saving mode, dwell time minimal
Index: [0] = Mode 1
[1] = Reserved
Note: It is not permissible that the value is less than the sum of the "energy-saving mode transition time" and the "operat-
ing state transition time" (system properties).
Pe: PROFIenergy profiles
Description: Sets the maximum dwell time for the energy-saving mode.
Index: [0] = Mode 1
[1] = Reserved
r4689[0...2] CO: Squarewave encoder diagnostics / Sq-wave enc diag
Access level: 4 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: -
Min Max Factory setting
- - -
r5600 Pe energy saving mode ID / Pe mode ID
CU240D-2_PN
CU240D-2_PN_F
CU250D-2_PN_F
Access level: 3 Calculated: - Data type: Integer16
Can be changed: - Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 255 -
p5602[0...1] Pe energy-saving mode pause time minimal / Pe mod t_pause min
CU240D-2_PN
CU240D-2_PN_F
CU250D-2_PN_F
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: T Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: -
Min Max Factory setting
300000 [ms] 4294967295 [ms] [0] 300000 [ms]
[1] 480000 [ms]
p5606[0...1] Pe energy-saving mode dwell time maximum / Pe t_dwell max
CU240D-2_PN
CU240D-2_PN_F
CU250D-2_PN_F
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: T Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 [ms] 4294967295 [ms] 4294967295 [ms]