Siemens SINAMICS G120D - 2.7 Internal control;status words

Internal control/status words
Function diagrams
2-613
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
2.7 Internal control/status words
Function diagrams
2500 – Overview 2-614
2501 – Control word, sequence control 2-615
2503 – Status word, sequence control 2-616
2505 – Control word, setpoint channel 2-617
2510 – Status word 1 (r0052) 2-618
2511 – Status word 2 (r0053) 2-619
2512 – Control word 1 (r0054) 2-620
2513 – Control word 2 (r0055) 2-621
2520 – Control word, speed controller 2-622
2522 – Status word, speed controller 2-623
2526 – Status word, closed-loop control 2-624
2530 – Status word, current control 2-625
2534 – Status word, monitoring functions 1 2-626
2536 – Status word, monitoring functions 2 2-627
2537 – Status word, monitoring functions 3 2-628
2546 – Control word, faults/alarms 2-629
2548 – Status word, faults/alarms 1 and 2 2-630
2634 – Sequence control - Missing enables 2-631