Siemens SINAMICS G120D - p20054[0...3] BI: OR 2 inputs; OR 2 inputs; r20055 BO: OR 2 output Q; OR 2 output Q; p20056 OR 2 run-time group; OR 2 RTG; p20057 OR 2 run sequence; OR 2 RunSeq

Parameters
List of parameters
1-470
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Description: Sets the signal source of input quantities I0, I1, I2, I3 of instance OR 2 of the OR function block.
Index: [0] = Input I0
[1] = Input I1
[2] = Input I2
[3] = Input I3
Description: Display parameter for binary quantity Q = I0 | I1 | I2 | I3 of instance OR 2 of the OR function block.
Description: Setting parameter for the run-time group in which the instance OR 2 of the OR function block is to be called.
Value: 1: Run-time group 1
2: Run-time group 2
3: Run-time group 3
4: Run-time group 4
5: Run-time group 5
6: Run-time group 6
9999: Do not calculate
Description: Setting parameter for the run sequence of instance OR 2 within the run-time group set in p20056.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20054[0...3] BI: OR 2 inputs / OR 2 inputs
CU240D-2_DP
CU240D-2_DP_F
CU240D-2_PN
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: U32 / Binary
Can be changed: T Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: 7212
Min Max Factory setting
- - 0
r20055 BO: OR 2 output Q / OR 2 output Q
CU240D-2_DP
CU240D-2_DP_F
CU240D-2_PN
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: 7212
Min Max Factory setting
- - -
p20056 OR 2 run-time group / OR 2 RTG
CU240D-2_DP
CU240D-2_DP_F
CU240D-2_PN
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: Integer16
Can be changed: T Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: 7212
Min Max Factory setting
1 9999 9999
p20057 OR 2 run sequence / OR 2 RunSeq
CU240D-2_DP
CU240D-2_DP_F
CU240D-2_PN
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: T Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: 7212
Min Max Factory setting
0 32000 80