Siemens SINAMICS G120D - p20133 CI: AVA 1 input X; AVA 1 input X; r20134 CO: AVA 1 output Y; AVA 1 output Y; r20135 BO: AVA 1 input negative SN; AVA 1 input neg SN; p20136 AVA 1 run-time group; AVA 1 RTG

List of parameters
Parameters
1-489
© Siemens AG 2012 - 2013 All Rights Reserved
SINAMICS G120D List Manual (LH14), 01/2013
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
Description: Sets the signal source of the input quantity X of instance AVA 1 of the absolute value generator with sign evalua-
tion.
Description: Display parameter for output quantity Y of instance AVA 1 of the absolute value generator with sign evaluation.
Description: Display parameter for signal SN that the input quantity X of instance AVA 1 of the absolute value generator with
sign evaluation is negative.
X < 0.0 => SN = 1
Description: Setting parameter for the run-time group in which instance AVA 1 of the absolute value generator with sign evalua-
tion is to be called.
Value: 5: Run-time group 5
6: Run-time group 6
9999: Do not calculate
p20133 CI: AVA 1 input X / AVA 1 input X
CU240D-2_DP
CU240D-2_DP_F
CU240D-2_PN
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: U32 / FloatingPoint32
Can be changed: T Scaling: PERCENT Dyn. index: -
Units group: - Unit selection: - Func. diagram: 7224
Min Max Factory setting
- - 0
r20134 CO: AVA 1 output Y / AVA 1 output Y
CU240D-2_DP
CU240D-2_DP_F
CU240D-2_PN
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: PERCENT Dyn. index: -
Units group: - Unit selection: - Func. diagram: 7224
Min Max Factory setting
- - -
r20135 BO: AVA 1 input negative SN / AVA 1 input neg SN
CU240D-2_DP
CU240D-2_DP_F
CU240D-2_PN
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: 7224
Min Max Factory setting
- - -
p20136 AVA 1 run-time group / AVA 1 RTG
CU240D-2_DP
CU240D-2_DP_F
CU240D-2_PN
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: Integer16
Can be changed: T Scaling: - Dyn. index: -
Units group: - Unit selection: - Func. diagram: 7224
Min Max Factory setting
5 9999 9999