Control for rotation of the Biopsy line.
To invoke the Biopsy Setup:
Condition: To invoke the Biopsy Setup, 2D mode must be active.
Press the [Utilites] key on the control panel.
Following menu appears, if Single Angle Biopsy is possible for an activated probe:
Biopsy kit name and the “Biopsy Line” buttons are dependent on the selected probe.
See ‘To program a Single Angle Biopsy Line’ on page 5‐16 for more information.
Probes and Biopsies
5-14
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
To Next Page
Loading...
