After selecting another application the menu changes back to the Bodymark menu with the
bodymark symbols of the selected application.
Return to the Bodymark menu, if no new application is selected.
Please note:
The main application (chosen in the “Probe Selection” menu) does not change! After selecting
the [Appl.] key the screen menu changes to the “Application Select” menu. When a “main”
application in the “Probe Selection” menu is selected, the Bodymark application is set
(changed) to this application.
4.10 Scan Assistant
General: Scan Assistant is an option. If this option is not installed, the [Scan Assistant] feature
is hidden.
The Scan Assistant tracks all measurements. It will also be listed in the worksheets.
To activate or edit the Scan Assistant:
'Scan Assistant Settings'
on page 13-62
To activate the Scan Assistant for the patient:
'Application Area'
on page 12-4
The Scan Assistant can be confirmed with a P-key:
Chapter 14
or the [Enter] key on the keyboard. Depending on the settings that are made in the
Systemsetup>Scan Assistant.
Operating the System
4-32
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
To Next Page
Loading...
