Note
Deletion using the trackball also works in the Exam Review.
12.2.3 Saving Files to Archive
In Standard Configuration, the images and cines on the clipboard are automatically saved to
Archive upon ending an exam. However, you can easily alter this. To alter, see 'End Exam
Button'
on page 14-10
Press the [End Exam] hardkey to save an exam and all its images.
12.2.4 Image Indices
Icons and indices indicate the following conditions.
•
Cine Display (Raw Data or Bitmap Cine)
•
Image/Clip was copied onto an external device (CD/DVD...)
•
Image marked for deletion
•
Image is open (loaded)
•
Aquisition Mode with Tooltip
12.2.4.1 Indices
Thru Access Cine Symbol
The Cine symbol denotes a saved Cine sequence and shows in the lower, right corner of the
screen. The two different symbols denote two different file types.
12.2.4.2 Export Symbol
The Export Symbol denotes that the image or cine sequence has been copied and has been
exported to a predefined data storage medium. If the export process has not yet been
performed, the middle circle of the symbol appears green. If the image has already been
exported, the middle circle of the symbol appears red. The symbol shows in the lower, left
corner of the screen.
Archive
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4 12-9
To Next Page
