8. If you have chosen CD/DVD as your saving destination, then the following dialog will
come up, asking you to label your CD or DVD.
9. Confirm with [OK].
10.
Confirm with [Yes]; (If you do not want to start the backup now, press [No].)
The Process bar appears.
As soon as the saving procedure is finished the following window appears.
11. Confirm with [OK]. You will be returned to the Image Archive tab.
13.2.7 Measure Setup
Press the [Measure Setup] key to enter the Measure Setup section, see'Measure Setup'
on
page 16-12
Utilities and System Setup
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4 13-61
To Next Page
Loading...
