Note
Changes are only possible in scan mode (Controls have no function in freeze mode). Changes
in the Gray Chroma Map, Tint Map and Display Size are possible in rfreeze mode.
Available functions
For more information, see:
•
'Reject'
on page 7-7
•
'Enhance'
on page 7-8
•
'Dynamic Control'
on page 7-8
•
'Display Size'
on page 7-8
•
'Gray Map'
on page 6-22
•
'Utilities'
on page 13-2
7.3.1 Reject
The “Reject” function determines the amplitude threshold above which the ultrasound echoes
are displayed on the screen (suppression of smaller echoes).
M Mode
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4 7-7
To Next Page
Loading...
