GE Voluson S8 - 16.10.9 BF (B-Flow); 16.10.10 Contrast (Agent)

maxmin-and X-ray
Gradient Light
Inversion
Glass Body
Mix Mode of two Render Modes
Display graphics: Rotation axis, center pointROI box, 3D Frametemporary display of onscreen
controls (rotation, translation)
Gray maps: Slices: 18
3D Image: one general map adjustable with Low Tones (-50 bis+50) & High
Tones (-50 to +50)
Tint maps: Tint 2D : 15
Tint 3D : 15
16.10.9 BF (B-Flow)
Screen formats: single (BF), dual, (BF+BF), quad (BF+BF+BF+BF)
Display modes: BF
Update: BF/PW
Acc. power range: 1 - 100%
Scan angle: taken from 2D
GAIN range: +15 to -15 dB
Gray scale values: 8 bit
SRI taken from 2D
Persistance filter: 8 steps (pre)
S./PRI 1.00, 1.50, 2.00, 3.00, 4.00..................15.00
Line Density 3 steps (pre) low, norm, high
Enhance: 6 steps (pre) 0 - 5
Gray maps: 18 basic maps
Tint maps: 15
Dynamic: 12 different dynamic curves C1 -C12
Accumulation: Off, 0.20, 0.35, 0.50, 0.75, 1.00, 1.50, Infinite
Background: 0, 1, 2
16.10.10 Contrast (Agent)
Screen formats: Coded Harm. Angio: Single (B), Dual (B+B), Quad (B+B+B+B)
Code PI: Single (B), Dual (B+B), Quad (B+B+B+B)
CIS: Dual simultan (2D + Coded PI)
CCIS: Single (B)
Display modes: Code Harmonic Angio
Technical Data / Information
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4 16-23