Display of the Standard Deviation (e.g., 0.6SD)
e.g. Mean: 0.00 SD
Min./Max.: -2SD / +2SD
out of range: < SD / > SD
Note
Selection of the field “Growth Dev. Display” in the Measure Setup is “SD”. For further details,
review: Global Parameters (chapter
'The Measure Setup Pages'
on page 11-109 )
3.
Display of the growth percentile (e.g., 71.9%)
e.g. Mean: 50%
Min./Max.: 5.0% / 95.0%
out of range: <5.0% / >95.0%
Measurements and Patient Worksheets (Reports)
11-46
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
To Next Page
