iPECS UCP - 2.30.3 Temporary Station COS (Class of Service);Lock

iPECS UCP
Feature Description and Operation Manual Issue 1.3
92
2.30.3 Temporary Station COS (Class of Service)/Lock
Description
You or an Attendant can change the Station’s Class of Service to COS 7, temporarily
preventing unauthorized outside calls from the station, i.e. “lock the station”. The Station can
still place internal calls and Emergency number calls.
Operation
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button.
To activate Temporary COS
2. Dial “21”, the Temp COS code.
3. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To restore the assigned COS
2. Dial “22”, the restore COS code.
3. Dial Authorization Code (station number and code).
4. Press the [HOLD/SAVE] button.
SLT
1. Momentarily press the hook-switch.
To activate Temporary COS
2. Dial “561”, the SLT Programming code.
3. Dial “21”, the Temp COS code.
4. Momentarily press the hook-switch.
1. Momentarily press the hook-switch.
To restore the assigned COS
2. Dial “561”, the SLT Programming code.
3. Dial “22”, the restore COS code.
4. Dial Authorization Code (station number and code).
5. Momentarily press the hook-switch.
System Attendant
1. Press the [TRANS/PGM] button.
To activate Temporary COS
2. Dial “021”, the Temp COS code.
3. Dial the Station range. If only one Station is to be assigned Temp COS, dial the
Station number twice.
4. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To restore the assigned COS
2. Dial “022”, the restore COS code.