iPECS UCP
Feature Description and Operation Manual Issue 1.3
294
SYSTEM DATA Common Attributes Privacy Warning Tone
External Control Contacts
Related Features
Meet Me Page Answer
Hardware
External Amplifier & Speakers
3.11.2 Meet Me Page
Description
During a Page, you may request another user respond to the Page and “Meet” you by dialing
the Meet-Me code. When the party dials the Meet-Me code, the page is terminated and an
intercom call is connected between you and the party.
Flexible buttons of iPECS IP and LDP Phones may be assigned as a {MEET ME} button.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + “544” + [HOLD/SAVE]
To assign a Flex button as a {MEET ME} button
1. Lift the handset or press the [SPEAKER] button.
To answer a page with Meet Me Page
2. Dial “544”, the Meet Me Page code.
Or,
Press the {MEET-ME} button.
SLT
1. Lift the handset to receive intercom dial tone.
To answer a page with Meet Me Page
2. Dial “544”, the Meet Me Page code.
Conditions
1. A Meet Me Page must be answered within the Page Time-out timer.
2. A station may answer a Meet Me Page from any station regardless of pickup or
paging group assignments and page access permission.
3. The paging party must remain Off-hook until the paged party answers the Meet Me
request. The initiator may press the Mute button to eliminate transmitting audio
over the page circuit while waiting for the party to answer.
To Next Page
Loading...
