iPECS UCP - 2.56 Mobile Extension

iPECS UCP
Feature Description and Operation Manual Issue 1.3
172
2.56 Mobile Extension
Description
Your mobile phone may be registered to your Station allowing the mobile phone to place and
receive calls through the system. Calls, except Private Line, that ring only to the station are
sent to your iPECS IP or LDP Phone and your registered mobile phone simultaneously. If you
are a Hunt group member, your Hunt group calls can also route to your mobile phone.
From your mobile phone you may access the facilities of the iPECS to place internal and
external calls as well as activate and access features. To access system facilities and
resources, you call your DID number from your mobile. When the call is received, the system
matches the Calling Line ID (CLI) to your mobile phone and provides you with system dial
tone.
You may be permitted to register and activate a mobile phone for the Mobile Extension
feature.
Operation
[TRANS/PGM] + {FLEX} + [TRANS/PGM]+ “37” + [HOLD/SAVE]
To assign a Flex button to Register a Mobile
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “38” + [HOLD/SAVE]
To assign a Flex button to activate Mobile Extension
iPECS IP LDP Phones
1. Press the [TRANS/PGM] button.
To register the mobile phone number
2. Dial “37”.
3. Dial the mobile phone number.
4. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To activate a registered mobile phone from the user’s station
2. Dial “38”.
3. Dial digit “1” to activate, “0” to deactivate.
4. Press the [HOLD/SAVE] button.
1. Dial the DID number of your station, the system will check the CLI, answer the call
and you receive internal dial tone.
To place a call from the mobile extension using the iPECS
2. Place an internal or external iPECS call as normal.
1. Dial “*”.
To Transfer an iPECS call on your mobile received from iPECS
2. Dial the desired station, the call is transferred and the mobile phone returns to idle.
Or,