iPECS UCP - DTMF Signaling

iPECS UCP
Feature Description and Operation Manual Issue 1.3
310
4.10 DTMF Signaling
Description
Dual Tone Multi-Frequency (DTMF) signals are used with Lines assigned for DTMF signaling.
The duration of the DTMF signal can be adjusted from 40 to 990 milliseconds.
Operation
System
Conditions
Operation of this feature is automatic when programmed.
1. The system mutes your voice transmission to reduce interference while sending
DTMF tones.
Programming
CO LINE DATA
Analog Attributes

CO Line Signal
SYSTEM DATA
System Timers

Inter-Digit Timer, DTMF Duration Timer
Related Features
 Dial Pulse Signaling
 Dial Pulse to Tone Switchover
Hardware