iPECS UCP - Speakerphone

iPECS UCP
Feature Description and Operation Manual Issue 1.3
364
5.22 Speakerphone
Description
Your iPECS IP or LDP Phone is equipped with speakerphone circuitry enabling the telephone
to be used hands-free in two-way conversations.
Operation
iPECS IP & LDP Phones
1. Press the [SPEAKER] button, [SPEAKER] LED lights steady.
To activate the speakerphone
1. Press the [SPEAKER] button, [SPEAKER] LED lights steady.
To switch from Handset to Speakerphone
2. Replace Handset, Speakerphone activated.
1. Press the [SPEAKER] button, [SPEAKER] LED extinguishes.
To terminate a speakerphone call
Conditions
1. If Automatic Speaker Select is enabled for the station, pressing a DSS, outside
Line or Speed Dial button will automatically activate the speakerphone.
2. The [MUTE] button LED indicates the status of the Microphone, when lit the
Microphone is inactive.
3. When Group Listen is enabled, pressing the [SPEAKER] button while using the
handset will send audio to both the Handset and Speaker. However, only the
Handset microphone is active. In order to activate the Speakerphone Microphone,
the Handset must be placed on-hook.
4. Each iPECS IP and LDP Phone equipped with Speakerphone is allowed/denied
Speakerphone operation in the system database.
5. When Headset operation is assigned for the station, the Speakerphone is disabled
and the [SPEAKER] button activates the Headset audio path instead of the
speaker.
6. The LIP-8002 phones are not equipped for speakerphone operation but do support
On-hook dialing.
Programming
STATION DATA Terminal Attributes Headset Ring, Speakerphone, E&MIC
Headset
Related Features
 Mute
 Group Listening