iPECS UCP
Feature Description and Operation Manual Issue 1.3
226
The Maintenance level has access to the entire database, all maintenance routines and
defines the Admin Access Authority of the two remaining passwords. The User and Admin
passwords can only access the defined database items. In Web Admin, a user of the
Maintenance password establishes the passwords and Web pages available to each
password level.
Operation
Conditions
Detailed operation of Admin access and assigning access authority for each level is given
in the iPECS UCP Administration & Programming Manual.
1. Admin Access Authority is defined only in the Web Admin; it cannot be defined
when using Keyset Admin.
2. Admin Access Authority applies to all Admin access whether accessed via an
iPECS IP or LDP Phone, ISDN, or IP channel.
Programming
SYSTEM DATA System Password
Station Web Authorization
Related Features
Keyset Administration
Web Administration
Hardware
2.78.3 Web Administration
Description
The system database is accessed and modified via an iPECS IP or LDP Phone, the LAN
interface or an ISDN BRI/PRI line. Both the LAN and ISDN access the system’s Web server,
which delivers the database as a set of Web pages to the user’s Web browser. Under the
proper conditions, both also allow for remote access to the system database.
For remote access, the system must be assigned a remotely accessible IP address. The IP
address should be fixed either as a public IP address or through a NAPT server with port
forwarding. The browser should be pointed to the system's IP address and the TCP port
assigned in the system database.
For the ISDN BRI/PRI, a PPP (Point-to-Point Protocol) connection can be established
To Next Page
Loading...
