iPECS UCP - 2.36 Emergency Call Service; 2.36.1 Emergency Call

iPECS UCP
Feature Description and Operation Manual Issue 1.3
104
2.36 Emergency Call Service
2.36.1 Emergency Call
Description
Regardless of a Station’s dialing restrictions (Class of Service), the user may dial any
assigned Emergency numbers.
Operation
System
Conditions
The system will automatically override any toll restrictions and process an assigned
Emergency number call.
1. If there is no idle outside Line for the emergency call, a busy Line will be forced to
release the current call and used for emergency call.
2. An emergency call can be placed without a Line access code, except Australia. If
an emergency number conflicts with the Station Numbering Plan, emergency calls
must use a Line access code. For example, if the emergency number is “112” and
the Station Numbering Plan is 100~, you must dial a Line access code before
dialing the emergency number “112”.
Programming
STATION DATA
Common Attributes

Emergency CO or Group
TABLES DATA
Emergency Code Table
Related Features
Hardware
2.36.2 Emergency Call Caller-Location Support
Description
Emergency Call - Caller Location Support integrates the iPECS UCP with a PBX ANI Link
unit, such as from Tone Commander, to provide Caller Id and location information to an
Emergency Call Center. When an Emergency call is placed from a Station, an assigned