iPECS UCP - 6.12 Disable Outgoing Line Access

iPECS UCP
Feature Description and Operation Manual Issue 1.3
385
6.6 Attendant Station User Program Codes
Description
Using the Attendant Station User Program Codes, the Attendant can print SMDR and Traffic
reports on-demand, assign Authorization Codes, control certain user features, record System
announcements, enable/disable Auto Service Mode Control, etc. Items are available using
the Program Code directly or scrolling the multi-level display menu. The following indicates
the menu displays, including the digit for selecting the item, the item description and further
required entries. The various levels of the display menu are indicated by indentation. For
additional information, reference Appendix A of the iPECS Administration & Programming
Manual.
Note also, some Program Codes are only available to the System Attendant or stations
allowed access to the Attendant Program code “0”.
[1] PRINT
[1] SMDR
[1] PRINT SMDR STA BASE
station range input
[2] DELETE STATION BASE
station range input
[3] DISPLY CALL CHARGE
[4] ABORT PRINTING
[5] PRINT LOST CALL
[6] DELETE LOST CALL
[2] TRAFFIC - System attendant only
[1] PRINT ALL SUMMARY
enter Analysis time & type
[2] PRINT ALL PERIDICLLY
enter Analysis time, type & Print time
[3] ABORT PERIDIC PRINTING
[4] PRINT ATD TRAFFIC
enter Analysis time & type
[5] PRINT CALL SUMMARY
[6] PRINT CALL HOURLY
[7] PRINT H/W USAGE