iPECS UCP
Feature Description and Operation Manual Issue 1.3
259
2.83 Universal Night Answer (UNA)
Description
UNA allows you to be alerted over an External Loud Bell and answer defined outside calls by
dialing the UNA code. While primarily intended for alternate answering during the Night
service mode, UNA will function in all service modes. Calls will appear on an appropriate
{LINE}, a {POOL} or {LOOP} button. An External Control Contact can be assigned to
activate an External Loud Bell to alert users of incoming calls.
The iPECS IP and LDP Phones may be assigned a Flex button as a {UNA} button.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + “567” + [HOLD/SAVE]
To assign a Flex button as a {UNA} button
1. Lift the handset or press the [SPEAKER] button.
To access an incoming UNA call
2. Dial “567”, the UNA feature code, the oldest UNA call is connected.
Or,
3. Lift the handset or press the [SPEAKER] button.
4. Press the {UNA} button; the oldest UNA call is connected.
SLT
1. Lift the handset.
To access an incoming UNA call
2. Dial “567”, the UNA feature code, the oldest UNA call is connected.
Conditions
Programming
To Next Page
Loading...
