iPECS UCP - Two-Way Record

iPECS UCP
Feature Description and Operation Manual Issue 1.3
375
5.26 Two-Way Record
Description
With your iPECS IP or LDP Phone, you can record any active conversation to your Voice
Mail mailbox or an external server such as the IP Call Recording server. All calls including
incoming, outgoing, internal, external, conference, conference rooms and conference group
calls can be recorded. A {RECORD} button must be assigned to access the On-demand Call
Recording feature.
When the recording destination is an iPECS IPCR server, recording can be paused(Secret)
Flex button and the Recording Announcement can be activated using configured Flexible
buttons.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “80” + recording destination (VM Group,
UCS Client, or recording server) + [HOLD/SAVE]
To assign a flexible button as a {RECORD} button
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “80” + recording destination (IPCR
server group) + “1” + [HOLD/SAVE]
To assign a {Secret} button
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “80” + recording destination (IPCR
server group) +”2” + [HOLD/SAVE]
To assign a {Announce} button
1. Press the {RECORD} button, record warning tone heard, and recording starts.
To activate Two-Way Record while on a call
1. Press the {Secret} button, recording and tones stop.
Press the {Secret} button to restart recording.
To mute Two-Way Record while on a call
1. Press the {RECORD} again.
To stop Two-Way Record while on a call
Or,
2. Hang-up, return to idle.
Conditions
To manage the recordings, use the procedures for the Voice Mail, as outlined in the UCS
Client User Guide, the iPECS IPCR User Guide or the third party guide, as appropriate.
1. The {RECORD} button LED will flash at 240 ipm while recording.
2. This feature is available when using the integrated VM, IP CR, third-party SIP
server, or using an external AA/VM, which employs the SMDI communications