iPECS UCP - 5.5 Call Log Display

iPECS UCP
Feature Description and Operation Manual Issue 1.3
337
5.5 Call Log Display
Description
Using an iPECS IP or LDP Phone with 3-Soft buttons, you can view a log of incoming,
outgoing and missed calls on the display. A Flex button must be assigned as a {CALL LOG}
button, which allows easy access to the Call Log menu.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “57” + [HOLD/SAVE]
To assign a {CALL LOG} button
1. Press the {CALL LOG} button.
To access the Call Log menu
1. RECEIVED CALL
2. DIALED CALL
OK
2. Using the Volume Up/Down keys, select the desired log (received, dialed, or
missed).
123467890
24/07 14:51
BACKDELETEOK
Conditions
1. The number of records in the Call Log is limited by the Call Log attribute in the
System Data.
Programming
SYSTEM DATA System AttributesCall Log Number, ICM Call Log, Number
of CLI Wait List
Related Features
Hardware
 iPEC SIP and LDP Phones with LCD