iPECS UCP - Automatic Pause Insertion

iPECS UCP
Feature Description and Operation Manual Issue 1.3
44
2.9 Automatic Pause Insertion
Description
The system will automatically pause when dialing a Speed Dial number to allow for potential
connection delays.
The pause will be inserted when any of the following occur:
 After a Flash is encountered in a Speed Dial number.
 After a PBX access code is encountered in a Speed Dial or redial number.
 After a Pulse to Tone Switchover is encountered in a Speed Dial or Redial number.
 When a connect message is received on an ISDN Line.
Operation
System
Conditions
The system automatically pauses dialing after an appropriate event.
1. An automatically inserted pause is not counted as a digit in a Speed Dial number.
2. The LCD of an iPECS IP or LDP Phone will show a "P" when a pause is
encountered. This indication is not shown if the system inserts the Pause
automatically.
Programming
SYSTEM DATA
System Timers

Pause Timer
Related Features
 Station Speed Dial
 System Speed Dial
 Auto Called Number Redial (ACNR)
 LNR (Last Number Redial)
 Dial Pulse to Tone Switchover
Hardware