iPECS UCP
Feature Description and Operation Manual Issue 1.3
116
2.39 Flexible Numbering Plan
Description
Your access to the iPECS system resources and features is accomplished through feature
codes or Flexible buttons on your iPECS IP or LDP Phone. The Administrator selects from
one of the eight (8) different standard numbering plans and, if desired, assigns codes for
individual features in the Flexible Numbering Plan. The feature codes are defined in the
Flexible Numbering Plan; refer to the iPECS Admin and Programming Manual.
Operation
System
Conditions
System implements feature activation based on the Flexible Numbering Plan.
1. Feature codes can be one to four digits in length.
2. During programming, conflicts in the Numbering Plan are not allowed. The existing
on-conflicting Numbering Plan is used until correctly updated.
Programming
SYSTEM ID &
NUMBERING PLANS
System ID
Flexible Station Number
To Next Page
Loading...
