iPECS UCP
Feature Description and Operation Manual Issue 1.3
411
7.5 SLT Name Entry
Description
A SLT user has the capability to program a name. When placing an internal call, the Name is
sent to the called party in place of the station number.
Operation
SLT
1. Lift the handset.
To register the name at the SLT
2. Dial “561”, the SLT Programming code, confirmation tone is heard.
3. Dial “74”, the Name Program Code.
4. Enter name, refer to Station Speed Dial, Alphanumeric Chart.
5. Momentarily depress the hook-switch, receive confirmation tone.
1. Lift the handset.
To delete the name at the SLT
2. Dial “561”, the SLT Programming code, confirmation tone is heard.
3. Dial “74”, the Name Program Code.
4. Momentarily depress the hook-switch, receive confirmation tone.
Conditions
Programming
To Next Page
Loading...
